歡迎訪問“四川日在校园粉體設備有限公司”官方網站!谘詢熱線:13778155201 13778026462
聯係方式
     0816-7107988
      sczjpe@163.com
      四川綿陽市安州區花荄工業園
產品中心 > 機械粉碎機係列
機械粉碎機係列
分級式衝擊磨

 


工作原理

物料由進料裝置輸送至主機粉碎腔,物料與高速回轉器件及顆粒之間互相衝擊、碰撞、磨擦、剪切、擠壓而實現粉碎。粉碎後的物料通過分級輪實現粗細粉的分離,粗粉流入粉碎腔再次粉磨,淨化的氣體由引風機排出。

 

設備特點:

1、低能耗:集離心粉碎、衝擊粉碎、擠壓粉碎於一身,比其它類機械粉碎機節能高達40~50%。

2、高細度:配備自分流式分級係統,產品細度≥2500目。

3、入料範圍大:入料粒度≤50mm,物料僅需經一級粗破設備。
4、低磨損:粉碎部分易損件采用複合耐磨新材料,使用壽命長,加工莫氏硬度≤5的物料時無汙染。
5、機械穩定性強:可長期24小時不停機生產。
6、功能全:
   可粉碎針狀物料,做到成品長徑比15:1;
   粉碎過程無溫升,適合於熱敏性材料的粉碎;
   可對燒結團聚超細物料進行打散作業,粒度恢複率達100%;
   具有顆粒整形功能,有效提高堆積密度。
   可粉碎纖維組織的材料;
   可粉碎水分含量高的物料,具有烘幹功能;
   可粉碎粘性強的物料。

7、負壓生產,無粉塵汙染,環境優良。
8、自動化程度高,穩定性強,操作簡便。

9、整個係統采用自動化控製,可實現一鍵式啟停,操作簡單方便與中控聯接可實現遠程控製。

適用範圍 

    1、 非金屬礦典型物料有: 硬質高嶺土、滑石、石墨、方解石、石膏、矽藻土、矽灰石、重晶石、葉臘石、氫氧化鋁等材料的超細粉碎和納米碳酸鈣、氧化鈰等物料的超細粉碎、打散。 

    2、 熱敏性典型物料有: 乳糖、蠟、樹脂、脂肪、骨粉、植物等 

    3、 中草藥與原料的超細加工典型物料有: 花粉、山楂、香菇、珍珠粉、胃藥、尼莫地平、抗生素類藥物、靈芝、五倍子、何首烏、穿心蓮、薄荷、魚腥草、蕨根、葛根、板藍根等。 

 

主要技術參數Main technical parameters

設備型號 

Model

入料粒度
Max feed Size
成品細度
Product Size
生產能力
Capacity
裝機功率
Power

ZJ-C100

<3 mm

1-75µm

3-15kg/h

12 kw

ZJ-C200

<3 mm

1-75µm

 20-100 kg/h 

25kw

ZJ-C400

<3 mm

1-75µm

 60-400 kg/h 

65kw

ZJ-C600

<3 mm

1-75µm

 100-1000 kg/h

100kw

ZJ-C1000

<3 mm

1-75µm

 400-2000 kg/h 

160kw

ZJ-C1250

<3 mm

1-75µm

 600-4000 kg/h

200kw 

 應用案例

 

Working principle

The material is transported from the feed device to the main crushing chamber, and the materials are smashed, collided, rubbed, sheared and squeezed with the high speed rotating device and particles. After crushing, the material is separated by a grading wheel, and the coarse powder flows into the crushing cavity and is pulverized again, and the purified gas is discharged by the draft fan.

Equipment features

1, low energy consumption: centrifugal grinding, impact grinding, crushing, crushing, grinding, energy saving than other mechanical shredders up to 40-50%.

2, high fineness: equipped with self flow type classification system,  fineness≥2500 Mesh.

3, feed range: Max feed size≤50mm, only the material level coarse crushing equipment.

4, low wear: crushing parts wearing parts with complex wear resistant material, long service life, Mohs hardness≤ 5 No pollution when material.

5, strong mechanical stability: can not be stopped for 24 hours.

6, full-featured:

It can crush needle shaped material and achieve the ratio of length to diameter of 15:1;

The grinding process of temperature rise, suitable for heat sensitive material crushing;

The sintering and agglomeration superfine materials can be dispersed and the recovery rate of particle size is 100%;

With particle shaping function, it can effectively improve the bulk density.

Material that can crush fibrous tissue;

The utility model can grind materials with high moisture content, and has drying function;

Material capable of crushing viscous material.

7, negative pressure production, no dust pollution, good environment.

8, high degree of automation, stability, easy to operate.

9, the whole system adopts automatic control, which can realize one button type start and stop. The operation is simple and convenient, and the central control connection can realize remote control.

Scope of application:

1, non-metallic mineral materials are typical of hard kaolin, talc, graphite, calcite, gypsum and diatomite, wollastonite, barite, pyrophyllite, aluminum hydroxide materials such as ultra-fine grinding and nano calcium carbonate, cerium oxide materials such as ultra-fine grinding,.

2, the sensitive material of typical materials are: lactose, wax, resin, fat, bone, plants etc.

3, typical materials, fine processing of Chinese herbal medicine and raw materials are: pollen, hawthorn, letinous edodes, pearl powder, stomach medicine, nimodipine, antibiotics, Galla chinensis, Ganoderma lucidum, Polygonum multiflorum, Andrographis, mint, Houttuynia, fern root, radix puerariae, Radix Isatidis etc..


四川日在校园粉體設備有限公司

Sichuan Zhongjin Powder Equipment Co., Ltd
四川綿陽市安州區花荄工業園 P.c 621000
Mianyanganzhou huagai Industrial park in Sichuan,china
Copyright © 2012-2017川日在校园粉體設備有限公司All rights reserved.蜀ICP備18005177號 技術支持:魔方建站